Release 3.0.1 Version (2024/04/10)

Software Build       Feature or Fix Description

New feature:

[Feature] Added WebAccess/CNC driver block drawing function.

[Feature] Added block drawings for FANUC FOCAS and FANUC robot.

[Feature] Added block drawings for HAAS, MITSUBISHI, SYNTEC, FAGOR, LNC, KND and HNC CNC.

[Feature] Added block drawings for brother CNC (B00, C00 & D00 series).

[Feature] Added block drawings for Siemens OPC UA and Siemens S7 TCP (840D & 828D series).

[Feature] Added block drawings for HEIDENHAIN LSV2 (iTNC 530 & TNC 640 series).

[Feature] Added block drawings for CNC runtime.

[Feature] Added brother CNC alarm message files.

Update feature:

[Feature] Added the FAGOR CNC of WebAccess/CNC explorer.

[Feature] Replaced the bwnode.mdb before WebAccess/SCADA V9.1.6.

[Feature] Added MASTATUS tag for WebAccess CNC driver

Fix bug:

[Defect] Fixed the CNC explorer parameters for SYNTEC and KUKA OPC UA.

[Defect] Modified mode.extvt0 of Mitsubishi CNC driver

 

Release 2.0.17 Version (2023/10/03)

Software Build       Feature or Fix Description

New feature:

[Feature] Added brother D00 CNC driver for WebAccess/CNC driver

[Feature] Added KND CNC driver for WebAccess/CNC driver

[Feature] Added HEIDEHAIN CNC LSV2 driver for WebAccess/CNC driver

Update feature:

[Feature] Replaced the bwnode.mdb before WebAccess/SCADA V9.1.5

[Feature] Replaced the datacore.exe before WebAccess/SCADA V9.1.5

[Feature] Enhance Fanuc macro system variables can support common variables and system variables for WebAccess/CNC driver.

[Feature] Updated the HEIDENHAIN library files (3.4.SP1)

[Feature] Added the curncblk for SIEMENS CNC OPC UA

[Feature] Added MTConnect license in WebAccess/CNC driver

[Feature] Enhance some CNC analog tag property (.extvt0)

 

Release 2.0.16 Version (2023/10/03) (* only for CNC runtime HEIDENHAIN TNC640)

Software Build       Feature or Fix Description

New feature:

[Feature] Added KND CNC driver for WebAccess/CNC driver

[Feature] Added HEIDEHAIN CNC LSV2 driver for WebAccess/CNC driver

Update feature:

[Feature] Replaced the bwnode.mdb before WebAccess/SCADA V9.1.5

[Feature] Replaced the datacore.exe before WebAccess/SCADA V9.1.5

[Feature] Updated the HEIDENHAIN library files (3.4.SP1)

[Feature] Added the curncblk for SIEMENS CNC OPC UA

[Feature] Added MTConnect license in WebAccess/CNC driver

[Feature] Enhance some CNC analog tag property (.extvt0)

 

Release 2.0.15 Version (2023/06/1)

Software Build       Feature or Fix Description

New feature:

[Feature] Added SIEMENS CNC OPC UA driver for WebAccess/CNC driver

[Feature] Adopted the new SkyMars version 3.08 G2.81 for WebAccess/CNC runtime

Update feature:

[Feature] Replaced the bwnode.mdb before WebAccess/SCADA V9.1.5

[Feature] Replaced the datacore.exe before WebAccess/SCADA V9.1.5

[Feature] Enhanced FAGOR CNC driver for WebAccess/CNC driver

[Feature] Enhanced LNC CNC driver for WebAccess/CNC driver

Fix bug:

[Defect] Fixed the API alarm_current2 for SIEMENS

 

Release 2.0.14 Version (2022/10/04) (* only for HEIDENHAIN TNC640)

Software Build       Feature or Fix Description

New feature:

[Feature] Special version for HEIDENHAIN controllers based on V2.0.13

[Feature] Adopted the new SkyMars version 3.074 G3.19 for HEIDENHAIN T640

Update feature:

[Feature] Updated HeidenhainDNCLib.dll from V1.5.0 to V1.6.2

Fix bug:

[Defect] Fixed the API alarm_current2 for HEIDENHAIN

 

Release 2.0.13 Version (2023/02/23)

Software Build       Feature or Fix Description

New feature:

[Feature] Supported CNC data mapping of WebAccess UTE/OEE option

[Feature] Supported Microsoft Edge and IE Explorer of WebAccess/CNC explorer

[Feature] Adopted the new SkyMars version 3.077 G2.8 for WebAccess/CNC runtime

Update feature:

[Feature] Added WebAccess/CNC runtime parameters to the bwnode.mdb instead of bwcfg.mdb

[Feature] Added the default password for CNC runtime of WebAccess/CNC explorer

[Feature] Replaced the bwnode.mdb before WebAccess/SCADA V9.1.4

[Feature] Substituted IE WebAccess client with WebAccess edge client

Fix bug:

[Defect] Fixed HNC parameter display in the WebAccess/CNC explorer

[Defect] Fixed Fanuc 2nd path NC download bug of the WebAccess/CNC driver

 

Release 2.0.12 Version (2021/12/01)

Software Build       Feature or Fix Description

New feature:

[Feature] Added HNC CNC driver for WebAccess/CNC driver

[Feature] Added FANUC RS232 driver (DPRNT) for WebAccess/CNC driver

Update feature:

[Feature] Adjusted the emergency’s address setting of MITSUBISHI CNC driver

[Feature] Added Haas CNC tags about the spindle information

Fix bug:

[Defect] Added the MITSUBISHI block’s text points of WebAccess/CNC driver

[Defect] Fixed some CNC automatically generate block bug of WebAccess/CNC explorer V2.0.11

 

Release 2.0.11 Version (2021/07/01)

Software Build       Feature or Fix Description

New feature:

[Feature] Added MITSUBISHI CNC driver for WebAccess/CNC driver

[Feature] Added KUKA robot OPC UA driver for WebAccess/CNC driver

[Feature] Adopted the new SkyMars version 3.076 G2.8 for WebAccess/CNC runtime

[Feature] Added WebAccess CNC driver installation item for WebAccess/SCADA V8.x & V9.x version compatibility.

Update feature:

[Feature] Enhanced FANUC CNC driver including the tool’s life, the path number function for WebAccess/CNC driver

[Feature] Adjusted the address setting with PLC’s data type of FANUC CNC driver

[Feature] Adjusted SIEMENS CNC driver for WebAccess/CNC driver

[Feature] Supported the main program of SIEMENS CNC for WebAccess/CNC runtime

[Feature] Adjusted FANUC alarm message folder for current alarm and history alarm of WebAccess/CNC runtime

[Feature] Adjusted the WebAccess/CNC explorer for CNC driver setting

Fix bug:

[Defect] Fixed the offset bug of WebAccess/CNC explorer V2.0.10

 

Release 2.0.10 Version (2020/09/22)

Software Build       Feature or Fix Description

New feature:

[Feature] Adopted the new SkyMars version 3.081 G2.76 for WebAccess/CNC runtime

[Feature] Added OKUMA CNC driver for WebAccess/CNC driver

[Feature] Added SIEMENS CNC driver for WebAccess/CNC driver

Update feature:

[Feature] Enhanced FANUC CNC driver for WebAccess/CNC driver

[Feature] Removed the maintain function & the tool function in the WebAccess/CNC runtime web functions.

Fix bug:

[Defect] Fixed the SkyMars API memory issue

 

Release 2.0.9 Version (2020/5/22)

Software Build       Feature or Fix Description

New feature:

[Feature] Adopted the new SkyMars version 3.074 G2.76 for WebAccess/CNC runtime

[Feature] Added FAGOR CNC driver for WebAccess/CNC driver

[Feature] Added RODERS CNC driver for WebAccess/CNC driver

Update feature:

[Feature] Enhanced BROTHER CNC driver for WebAccess/CNC driver

[Feature] Enhanced HAAS CNC driver for WebAccess/CNC driver

[Feature] Enhanced FANUC CNC driver for WebAccess/CNC driver

 

Release 2.0.8 Version (2020/3/13) (* only for HEIDENHAIN TNC640)

Software Build       Feature or Fix Description

New feature:

[Feature] Added HAAS CNC driver for WebAccess/CNC driver

[Feature] Added SYNTEC CNC OPC UA driver for WebAccess/CNC driver

[Feature] Added FANUC Robot driver for WebAccess/CNC driver

Update feature:

[Feature] Adjusted the WebAccess/CNC Explorer for CNC driver setting

[Feature] Adopted the new SkyMars version 3.074 G3.14 for HEIDENHAIN T640

 

Release 2.0.7 Version (2019/1/25)

Software Build       Feature or Fix Description

Update feature:

[Feature] Adopted the new SkyMars version 3.074 G2.74 for WebAccess/CNC runtime

 

Release 2.0.6 Version (2018/12/12)

Software Build       Feature or Fix Description

Fix bug:

[Defect] Updated the VCDLL.dll for the MITSUBISHI CNC

Update feature:

[Feature] Adopted the HEIDENHAIN Library V1.3.8 for iTNC 530 only

 

Release 2.0.5 Version (2018/10/30) (* only for HEIDENHAIN TNC640)

Software Build       Feature or Fix Description

Fix bug:

[Defect] Fixed the SkyMars API “SKY_conn_status_single

Update feature:

[Feature] Adjusted the device setting that not support iTNC530

[Feature] Adopted the HEIDENHAIN Library V1.6.3 for TNC 640 only

 

Release 2.0.4 Version (2018/10/30)

Software Build       Feature or Fix Description

Fix bug:

[Defect] Fixed the SkyMars API “SKY_conn_status_single

Update feature:

[Feature] Adjusted the device setting that not support TNC640

[Feature] Adopted the HEIDENHAIN Library V1.3.8 for iTNC 530 only

 

Release 2.0.3 Version (2018/10/22)

Software Build       Feature or Fix Description

New feature:

[Feature] Added the FOCAS driver for WebAccess/CNC driver

[Feature] Added the HEIDENHAIN PLC address mapping of the device setting for WebAccess/CNC runtime

Fix bug:

[Defect] Fixed the FANUC PLC write function bug by PMC

[Defect] Fixed the MITSUBISHI macro function bug by PMC

[Defect] Fixed the HEIDENHAIN block parameters

Update feature:

[Feature] Adjusted the WebAccess/CNC Explorer for CNC driver setting

[Feature] Adjusted the reading method of the FANUC almmessage.ini

[Feature] Adopted the new HEIDENHAIN Library for iTNC 530 & TNC 640

 

Release 2.0.2 Version (2018/06/13)

Software Build       Feature or Fix Description

New feature:

Fix bug:

[Defect] Fixed the error determination of brother CNC when using auto searching function of LNC CNC

Update feature:

 

Release 2.0.1 Version (2018/05/22)

Software Build       Feature or Fix Description

New feature:

[Feature] Adjusted memory size of each connection

Fix bug:

[Defect] Fixed the MITSUBISHI M70 program list bug by PMC

Update feature:

 

Release 2.0.0 Version (2018/05/15)

Software Build       Feature or Fix Description

New feature:

[Driver] Added the brother CNC driver B00/C00

[Driver] LNC CNC driver is free for WebAccess/SCADA V8.3.1 later

[Feature] Added the auto discovery function for brother controller

Fix bug:

[Defect] Fixed the program display/upload/download bug

[Defect] Fixed the incomplete installation problem

[Defect] Added the default alarm message after explorer process

[Defect] Fixed only the ten devices showing problem in the explorer tool

Update feature:

 

Release 1.0.17 Version (2018/02/09)

Software Build       Feature or Fix Description

New feature:

Fix bug:

[Defect] Fixed only the first alarm display in the LNC driver

Update feature:

 

Release 1.0.16 Version (2018/01/22)

Software Build       Feature or Fix Description

New feature:

Fix bug:

[Defect] Fixed the installation problem showing "install CNC Runtime error" in some OS Update feature:

 

Release 1.0.15 Version (2018/01/09)

Software Build       Feature or Fix Description

New feature:

Fix bug:

[Defect] Fixed the SkyMars registers are not wrote correctly in WIN10

Update feature:

 

Release 1.0.14 Version (2018/12/05)

Software Build       Feature or Fix Description

New feature:

[Feature] Added the runtime & explorer options in the installation interface

[Feature] Added the PLC status of SIEMENS drivers

Fix bug:

[Defect] Fixed the crash problem when no device choosing in the device setting

[Defect] Modified the availability calculation method of the overview

Update feature:

[Update] Added the display of the CurrSeq and CurNcPtr at the same time

[Update] Added the parameter "FNcPath" for FTP path in CNC

 

Release 1.0.13 Version (2017/11/06)

Software Build       Feature or Fix Description

New feature:

Fix bug:

[Defect] Fixed the project can't be established in the explorer process when the device parameters has been changed 

[Defect] Fixed the program list issue of driver

Update feature:

 

Release 1.0.12 Version (2017/10/19)

Software Build       Feature or Fix Description

New feature:

[Feature] Used the MSI package

Fix bug:

[Defect] Fixed the problem that some SkyMars registers can't be wrote

Update feature:

[Update] Adjusted the Japanese explanations of the interface

 

Release 1.0.11 Version (2017/10/18)

Software Build       Feature or Fix Description

New feature:

[Feature] Added the writing function of LNC tags

[Feature] Added the display of the NC program block

Fix bug:

[Defect] Fixed the bug that the tags established by the user won't be covered after the explorer process again

[Defect] Fixed the display of the executed NC program block of FANUC, SIEMENS & MITSUBISHI & HEIDENHAIN

[Defect] Fixed the complete tips of using FTP functions are showing too early

Update feature:

 

Release 1.0.10 Version (2017/08/02)

Software Build       Feature or Fix Description

New feature:

[Feature] Added auto discovery function for LNC controller

[Feature] Added the display of the NC program block

[Feature] Added the parameter "MNc path" to control the NC path of CNC memory

Fix bug:

Update feature:

 

Release 1.0.8 Version (2017/06/03)

Software Build       Feature or Fix Description

New feature:

[Feature] Added Japanese interface

[Feature] Added the curve of the spindle speed

[Feature] Increased the display of 75 G Code

[Feature] Added the filter function of history alarm and message

Fix bug:

[Defect] Fixed the API garbled problem

[Defect] Fixed the IIS problem that the parameter can't be changed when APP Pool is existing

Update feature:

 

Release 1.0.7 Version (2017/02/17)

Software Build       Feature or Fix Description

New feature:

[Feature] Added the LNC controller driver

Fix bug:

[Defect] Fixed the extra characters of SkyMars connecting to M80

[Defect] Fixed the same IP querying by custom & communication issue of SkyMars

[Defect] Fixed MITSUBISHI M80 macro variables can't be search

[Defect] Fixed SkyMars APISET_toolmanage_single_cycletime can't be wrote

[Defect] Fixed the reopen issue of CNC runtime

[Defect] Fixed the axis unit of information

Update feature:

 

Release 1.0.6 Version (2016/12/27)

Software Build       Feature or Fix Description

New feature:

[Feature] Adjusted the max axis number to 12

Fix bug:

[Defect] Fixed MITSUBISHI issues from PMC

[Defect] Fixed the adding and modifying functions of device setting

[Defect] Changed the decimal 4 digits of axis position

[Defect] Fixed the displaying problem of the max loading of servo axis

[Defect] Fixed the display problem of the feed rate

Update feature:

 

Release 1.0.5 Version (2016/11/22)

Software Build       Feature or Fix Description

New feature:

[Feature] Added the wrong alarm message in SkyMars for FANUC

Fix bug:

[Defect] Fixed the one MITSUBISHI connection problem from PMC

[Defect] Fixed the UpMPgm function bug

[Defect] Fixed the driver become slow problem when switching bgr

Update feature:

 

Release 1.0.3 Version (2016/11/01)

Software Build       Feature or Fix Description

New feature:

[Feature] Added MITSUBISHI-EZ controller

[Feature] Added the offset API for FANUC and MITSUBISHI

[Feature] Added the macro API for FANUC and MITSUBISHI

[Feature] Added the spindle and servo temperature API

[Feature] Added the directly entering machine information page without using overview page

Fix bug:

[Defect] Fixed the old device problem in explorer process

[Defect] Fixed the writing function of working coordinate

[Defect] Fixed the adding new program can't be saved

[Defect] Fixed the exception error message when FANUC working coordinate is saving

[Defect] Fixed HEIDENHAIN Parameter/PRESET problem that showing please waiting

[Defect] Fixed the bug of querying availability interface

[Defect] Fixed the driver crash when the name is different of device setting and project node and SCADA noder

Update feature:

 

Release 1.0.2 Version (2016/08/01)

Software Build       Feature or Fix Description

New feature:

[Feature] Added the excel export function of alarm and parameter setting

[Feature] Added the re check function when uploading files and writing parameters

[Feature] Added the action log function when uploading files and writing parameters

[Feature] Added the enable/disable function of menu functions

Fix bug:

[Defect] Fixed the wrong display of executing status

[Defect] Fixed the availability calculation bug

[Defect] Fixed the problem when start runtime of the device setting interface

Update feature:

 

Release 1.0.1 Version (2016/07/15)

Software Build       Feature or Fix Description

New feature:

[Feature] Added SkyMars no UI version

[Feature] Added Multi language interface

Fix bug:

Update feature:

 

Release 1.0.0 Version (2016/06/16)

Software Build       Feature or Fix Description

New feature:

[Feature] Integrated SkyMars to support FANUC, MITSUBISHI, HEIDENHAIN, SIEMENS controller

Fix bug:

Update feature: